WARP settings

WARP settings define the WARP client modes and permissions available to end users.

Global settings apply to all devices enrolled in your Zero Trust organization.
Device settings may vary across devices depending on which device profile is applied.

Global settings

Admin override

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Any mode	All plans

When Enabled, end users can turn off the WARP client using an override code provided by an admin. This feature allows users to work around a temporary network issue (for example, an incompatible public Wi-Fi, or a firewall at a customer site blocking the connection).

You can set a Timeout to define how long a user can toggle on or off the WARP switch. The timer starts when the user first enters their code into the WARP client. The code remains valid and can be reused anytime during this time period. For example, if Timeout is 24 hours, the user can re-enter the code at 23:59:00 and continue to turn off WARP until 47:59:00 (up to 48 hours total).

Retrieve the override code

To retrieve the one-time code for a user:

Enable Admin override.
Go to My Team > Devices.
Select View for a connected device.
Scroll down to User details and copy the 7-digit Override code.
Share this code with the end user for them to enter on their device.

The user will have an unlimited amount of time to activate their code.

Enter the override code

To turn off the WARP client on a user device:

In the WARP client, go to Settings > Preferences > Advanced.
Select Enter code.
Enter the override code. The WARP client will display a pop-up window showing when the override expires.
Turn off the WARP switch.

The client will automatically reconnect after the Auto connect period, but the user can continue to turn off WARP until the override expires.

Install CA to system certificate store

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
Windows, macOS, Linux	Gateway with WARP, Proxy mode	All plans

When Enabled, the WARP client will automatically install your organization’s root certificate on the device.

Override local interface IP Beta

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
Windows, macOS, Linux	Gateway with WARP, Secure Web Gateway without DNS Filtering	All plans

Overrides the default IP address of WARP’s virtual network interface such that each device has its own unique local interface IP.

This setting is primarily used in conjunction with the WARP Connector and for MASQUE. You can also use it when the default IP conflicts with other local services on your network.

Value:

Disabled: (default) Sets the local interface IP to 172.16.0.2 on all devices.
Enabled: Sets the local interface IP on each device to its CGNAT IP. The change takes effect within 24 hours.

The CGNAT IP assigned to a WARP device is permanent until the device unregisters from your Zero Trust organization. Disconnects and reconnects do not change the IP address assignment.

Device settings

Captive portal detection

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Any mode	All plans

When Enabled, the WARP client will automatically turn off when it detects a captive portal, and it will automatically turn back on after the Timeout duration.

Since captive portal implementations vary, WARP may not detect all captive portals. For more information, refer to Captive portal detection.

Mode switch

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Any mode	All plans

When Enabled, users have the option to switch between Gateway with WARP mode and Gateway with DoH mode. This feature does not support switching between any other modes.

Device tunnel protocol

Feature availability

WARP modes	Zero Trust plans ↗
Gateway with WARP Secure Web Gateway without DNS filtering	All plans

System	Availability	Minimum WARP version
Windows	✅	2024.6.415.0
macOS	✅	2024.6.416.0
Linux	✅	2024.6.497.0
iOS	Coming soon
Android	Coming soon
ChromeOS	Coming soon

Configures the protocol used to route IP traffic from the device to Cloudflare Gateway. It may take up to 24 hours for all devices to switch to the new protocol. To check the active protocol on a device, open a terminal and run warp-cli settings | grep protocol.

Value:

WireGuard: (default) Establishes a WireGuard ↗ connection to Cloudflare. The WARP client will encrypt traffic using a non-FIPs compliant cipher suite, TLS_CHACHA20_POLY1305_SHA256. When switching from MASQUE to WireGuard, users may lose Internet connectivity if their Wi-Fi network blocks the ports and IPs required for WireGuard to function.
MASQUE Beta : Establishes an HTTP/3 connection to Cloudflare. To use MASQUE, Override local interface IP must be Enabled. The WARP client will encrypt traffic using TLS 1.3 and a FIPS 140-2 ↗ compliant cipher suite, TLS_AES_256_GCM_SHA384.

For more details on WireGuard versus MASQUE, refer to our blog post ↗.

Lock WARP switch

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Any mode	All plans

Allows the user to turn off the WARP switch and disconnect the client.

Value:

Disabled: (default) The user is able to turn the switch on or off at their discretion. When the switch is off, the user will not have the ability to reach sites protected by Access that leverage certain device posture checks.
Enabled: The user is prevented from turning off the switch. The WARP client will always start in the connected state.

On MDM deployments, you must also include the auto_connect parameter with at least a value of 0. This will prevent clients from being deployed in the off state without a way for users to manually enable them.

Allow device to leave organization

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Any mode	All plans

When Enabled, users can log out from your Zero Trust organization by selecting Logout from Zero Trust in the WARP client UI. The Logout from Zero Trust button is only available for devices that were enrolled manually. Devices that enrolled using an MDM file are always prevented from leaving your Zero Trust organization.

Allow updates

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
macOS, Windows, Linux	Any mode	All plans

When Enabled, users will receive update notifications when a new version of the client is available. Only turn this on if your users are local administrators with the ability to add or remove software from their device.

Auto connect

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Any mode	All plans

When Enabled, the client will automatically reconnect if it has been disabled for the specified Timeout value. This setting is best used in conjunction with Lock WARP Switch above.

We recommend keeping this set to a very low value — usually just enough time for a user to log in to hotel or airport Wi-Fi. If any value is specified, the client defaults to the Connected state (for example, after a reboot or the initial install).

Value:

0: Allow the switch to stay in the off position indefinitely until the user turns it back on.
1 to 1440: Turn switch back on automatically after the specified number of minutes.

Support URL

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Any mode	All plans

When Enabled, the Send Feedback button in the WARP client appears and will launch the URL specified. Example Support URL values are:

https://support.example.com: Use an https:// link to open your companies internal help site.
mailto:yoursupport@example.com: Use a mailto: link to open your default mail client.

Service mode

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Any mode	All plans

Allows you to choose the operational mode of the client. Refer to WARP Modes for a detailed description of each mode.

Local Domain Fallback

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Gateway with WARP, Gateway with DoH	All plans

Configures the WARP client to redirect DNS requests to a private DNS resolver. For more information, refer to our Local Domain Fallback documentation.

Split Tunnels

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Any mode	All plans

Configures the WARP client to exclude or include traffic to specific IP addresses or domains. For more information, refer to our Split Tunnel documentation.

Directly route Microsoft 365 traffic

Feature availability

Operating Systems	WARP mode required	Zero Trust plans ↗
All systems	Any mode	All plans

Creates Split Tunnel Exclude entries for all Microsoft 365 IP addresses specified by Microsoft ↗. To use this setting, Split Tunnels must be set to Exclude IPs and domains. Once enabled, all Microsoft 365 network traffic will bypass WARP and Gateway.

Allow users to enable local network exclusion

Feature availability

WARP modes	Zero Trust plans ↗
Gateway with WARP Secure Web Gateway without DNS filtering	All plans

System	Availability	Minimum WARP version
Windows	✅	2024.1.159.0
macOS	✅	2024.1.160.0
Linux	✅	2024.2.62.0
iOS	❌
Android	✅	1.4
ChromeOS	✅	1.4

This setting is intended as a workaround for users whose home network uses the same set of IP addresses as your corporate private network. To use this setting, Split Tunnels must be set to Exclude IPs and domains.

When Enabled, users have the option to access local network resources (such as printers and storage devices) while connected to WARP. When the user enables Access local network in the WARP GUI, WARP will detect the local IP range advertised by the user’s home network (for example, 10.0.0.0/24) and temporarily exclude this range from the WARP tunnel. The user will need to re-request access after the Timeout expires. Setting Timeout to 0 minutes will allow LAN access until the next WARP reconnection, such as a reboot or a laptop waking from sleep.

Enabling this setting comes with two major consequences:

Device is exposed to security threats. The user may be unaware that traffic to what used to be their company’s private network is now actually being routed to their local network. This leaves the device vulnerable to on-path attackers ↗ and other security vulnerabilities. For example, imagine that a user’s typical workflow involves logging into a remote desktop on the corporate network at 10.0.0.30. A bad actor could set up a fake server on the local network at 10.0.0.30. If the user goes to 10.0.0.30 while Access local network is enabled, the attacker can now steal their credentials.
User loses access to corporate resources. — While accessing their local network, the user will be unable to connect to corporate resources that fall within the same IP/CIDR range.

Limitations

WARP will only exclude local networks in the RFC 1918 ↗ address space. Other IP addresses such as CGNAT are not supported.
The maximum excluded subnet size is /24.
If a Windows device has multiple network interfaces with distinct local IP ranges, WARP will only exclude one of those networks. To access a specific local network, disable the other interfaces and disconnect/reconnect WARP.

Cloudflare Dashboard Discord Community Learning Center Support Portal